Skip to main content

TECHACS Safety Solutions | Person Protective Equipment (PPE)| PPE Suppliers

The Portwest FR94 sizing chart is most useful when you distinguish the garment measurements from the wearer’s body measurements. Choosing a coverall from a familiar shirt size can miss differences in torso length, sleeve reach, and leg fit. Start with the model-specific document, then confirm the result through an appropriate fit review.

Open the model-specific size chart

The official FR94 size-chart PDF, linked from Portwest’s product page, shows chest-total, across-back, sleeve-length, and inside-leg measurement points. Read the sketch and the labels together. The chart also includes tolerances and tall adjustments.

This is a garment measurement chart. Do not treat every number as a recommended body circumference or assume that every size shown is currently offered in every color. Ask for help connecting your body measurements to the available garment selection.

Use a consistent measurement record

Record the units and measurement method along with the result. A useful worksheet has separate columns for employee measurements, proposed garment size, fit selection, and the final accepted choice. Avoid mixing measurements taken from a person’s body with measurements taken from an existing coverall in the same column.

If comparing a currently worn garment, identify its model and whether its condition or laundering history affects the comparison. A stretched or altered garment is an unreliable substitute for the manufacturer’s sizing instructions.

Resolve fit before committing the size run

Review torso room, shoulder movement, sleeve reach, and leg length with intended layers and work footwear. Tall and regular are separate fit choices. Confirm that the offered variant matches the employee’s needs rather than simply increasing the nominal size.

For a crew fitting, record exceptions immediately. Mark a size as pending until the employee’s selection is resolved, then count approved quantities by color and fit. This prevents an uncertain measurement from becoming a committed purchase-order line.

What to include in your inquiry

  • Current FR94 chart and measurement units
  • Body measurements separated from garment measurements
  • Regular or tall fit recorded
  • Accepted sample size or unresolved exception

Frequently asked question

Does the FR94 chart confirm stock availability?

No. It describes measurements. TECHACS must confirm the offered color, fit, size, quantity, and availability for the specific order.

Translate the FR94 chart into a decision, not a guess

When reading a sizing chart, first identify what its numbers describe. Body measurements, garment measurements, and general conversion tables are not interchangeable. Use the instructions accompanying the current FR94 chart and record the units. A number copied without its label or units can create a surprisingly persistent ordering error.

For example, a buyer may receive a chest measurement from one employee and a preferred retail shirt size from another. Those entries cannot be compared as though they came from the same process. Obtain the requested information consistently, then use the chart to identify a candidate size for fitting. Keep the original measurement and the selected garment size in separate fields.

If a wearer falls near a chart boundary, do not invent a universal rule to size up or down. Review the manufacturer’s guidance and evaluate the candidate in a safe fitting with the intended approved layers. For a coverall, include torso reach, sitting, and leg length in the assessment. A chest match alone does not resolve the entire one-piece fit.

The completed size record should name the chart or source used, the offered fit or length, the chosen size, and any remaining question. Share only the information needed for purchasing and issue. Once the wearer accepts the reviewed selection, use the exact variant for the quotation instead of repeatedly converting back to a general S, M, or L description.

Use measurements without confusing body size and garment size

Read the measurement labels before using a chart. Determine whether it describes body measurements, finished garment measurements or a particular measuring method. Record the units and the chart reference. A number without its measurement definition can create a false impression that two products have identical fit.

Use the current guidance for the exact model being considered. A previous brand or familiar casual-clothing size can be a starting reference, but it should not silently become the accepted selection for protective workwear. Ask for clarification when the chart’s method is unclear instead of inventing an allowance.

Keep measurement information distinct from the final size decision. The authorized fitting process may consider intended approved layers and normal movement as well as the chart. Record the resulting accepted size and fit, along with unresolved concerns that need review.

For a crew roster, limit access to personal measurement information according to the organization’s practices. The supplier generally needs the accepted variant and quantities, not an unnecessary employee history. Once the order is prepared, compare its size lines with the latest approved roster. This catches a common administrative problem: a correctly measured and fitted employee whose old estimated size remains on the purchasing spreadsheet.

Keep length requirements separate from size increases

A request for additional length should not automatically become a request for a larger regular garment. Keep nominal size and fit type in separate fields. Where the manufacturer offers a tall option, ask the supplier to confirm the exact size, color and fit combination needed.

During a fitting review, distinguish sleeve or leg length concerns from restriction through the body. Record where the issue occurs and which approved layers were used. This makes it easier for the responsible reviewer to determine whether the problem concerns length, overall size or another aspect of the selection.

Preserve the accepted fit type through every purchasing handoff. A roster, quote and order acknowledgment should all identify the same combination. If a tall designation disappears when data is copied into another system, the nominal size alone may no longer describe the intended garment.

When an accepted combination is unavailable, return the proposed alternative for review. Do not treat a larger regular size as an automatic substitute. At receiving, compare fit identifiers as well as the quantity. A delivery can contain the correct number of garments in the stated nominal size while still failing to resolve the workers’ accepted length requirements.

Review movement through the complete garment

Movement should be reviewed in relation to the work routine and the garment’s intended fit. For a coverall, the shoulders, torso and legs interact; for a shirt-and-pant arrangement, the reviewer also needs to consider the accepted combination. A photograph of someone standing still cannot resolve every fit question.

Choose a few relevant, safe movements for the sample review, such as reaching, sitting or bending where appropriate to the role. Ask the wearer to describe where any restriction occurs. Keep the model, size and approved layers with the observation so another reviewer can understand the circumstances.

Avoid treating an oversized garment as an automatic answer to every movement concern. More room in one area may introduce another fit problem. Likewise, an action-back feature does not eliminate the need to select an appropriate size.

If the issue remains unresolved after the authorized fitting process, send it to the person responsible for garment selection. Do not alter the sample or create an improvised wearing method to make it appear acceptable. The purchasing record should show the accepted selection and any conditions, allowing a later replacement to reproduce the reviewed arrangement rather than restarting the discussion from an incomplete memory.

Resolve each extended-size combination explicitly

An inquiry for an extended size should identify the complete model, color, fit and quantity. A general statement that a style is available does not establish availability of every combination. Ask the supplier to respond at the line level and keep unanswered variants visible.

Confirm the wearer’s selection through the model-specific sizing and fitting process before releasing the purchase. An employee’s size in another brand is useful background but not proof of an identical fit. Record the accepted combination so future replacements can use a reliable reference.

Separate the immediate wearer requirement from any authorized reserve quantity. This distinction helps purchasing understand which line is time-sensitive and which supports future demand. It also prevents a forecast size from being presented as a confirmed employee selection.

If an alternative is proposed, identify exactly what differs. A changed size, fit or model needs the appropriate review rather than automatic acceptance to complete the order. Keep the original requirement open until the replacement choice is accepted and acknowledged by the supplier. At delivery, reconcile the specific combination against the intended allocation, then retain the completed record for the next repeat request.

Use a small trial to resolve an actual purchasing uncertainty

A trial is most useful when the team agrees in advance what it is trying to learn. Examples include whether the offered length fits the intended wearers, whether pocket placement interferes with permitted equipment, or whether a different approved style is easier to wear correctly. Avoid an open-ended request for general opinions that cannot support a decision.

Choose participants who represent the relevant size range and work arrangements. Explain the questions, provide the approved clothing combination, and use safe fitting or evaluation conditions. A wearer trial is not a substitute for testing protective performance, and participants should not be exposed to a hazard to demonstrate a garment’s protection.

Record observations in consistent terms. Separate fit, movement, closure function, care experience, and preferences. A comment such as tight when reaching is more actionable when it includes the selected size and the clothing arrangement used. Do not publish personal measurements or individual personnel information with a general purchasing report.

Set a decision point before the trial begins. The outcome might be acceptance, a different size selection, a request for additional manufacturer information, or rejection of the candidate. Keep unresolved findings visible until they are addressed rather than letting the arrival of an ordering deadline count as approval.

Review products and request a quote

Explore Portwest FR94 at TECHACS. Send the accepted model list, quantities by size and color, delivery ZIP code, requested date, and any proposed customization.

Request a bulk FR workwear quote from TECHACS or call 212-202-1952. Pricing, availability, decoration suitability, and delivery arrangements are confirmed for the specific request.

Manufacturer references: Portwest FR94 product information. Review the current documents for the exact offered garment.